Q:What are the reasons for the tear of the belt and how to deal with it?

Answer: The reason for the tear of the belt:

1) Large objects are stuck in the falling coal pipe or coal pouring tank. 

2) The liner or baffle of the falling coal pipe falls off. 

3). The belt deflection is in serious contact with the bracket. 

4) Debris is stuck on the return belt.

 5), the coal plough, the wiper presses the hard block to the belt 

6), the roller (pulley) is drawn into the hard bar.

Treatment method:

1. Strengthen the monitoring and remove the sundries in time. 

2. Defects are found in a timely manner, let maintenance engineer to deal with them. 

3. Adjust the deviation in time. 

4. Intensify inspections and clean up in time.

5. Stop processing immediately.

SKE company will give you the right design for belt conveyor solution.